LUNAK LF-107

Semi-scale of the Czechoslovak aerobatics glider LF - 107 LUŇÁK. This model is designed as an acrobatic glider, capable of full aerobatics. LUNAK is suitable for slope flying, aerotow or take off through winch.

It was awarded "The Model of the Year 2002" at Model Hobby Fair in Prague.

Special Features: Fibreglass fuselage Two-pieces foam/balsa wing Fibreglass leading edge Wing joiner located in the middle of fibreglass spar Wing supported by carbon stripes and fibreglass under the balsa cover. Although the wing is not made from fibreglass, it has similar characteristics of stiffness, still being very light Ailerons and wing flaps fall into two parts - being 6 of them Clear canopy Oracover on wings and balsa tail parts Tight covering, with all seams hand-sealed Includes all necessary hardware RC function: Rudder, stabilizer, ailerons (2 flaps for each side), wing flaps Recommended Accessories: 5 Sanyo 3000 HV NiMH 6 x HS-225 MG or other aprox. 4 kg - 2 x HS-645 MG, HS-700 BB or other aprox. 7 kg

4000 mm 4200 g E 211 124,8 dm2   45-60 g/dm2